Blog
uedbet官网手机版最新-uedbet官网下载
Summary: The bar counting device is used in the packaging site of the bar production workshop, the finished product warehouse and the sales inspection letter site.
Release time:
2020/12/24
bar counting device For bar production workshop packaging site, finished goods warehouse and sales inspection letter site. It can greatly reduce the error rate of points, reduce the loss of measurement objections, and help companies improve product packaging quality and measurement accuracy.
Function setting
1.Sound and light alarm
2.Wireless Count
3.AC and DC
4.Preset Alarm Value
5.Double count value
uedbet官网手机版最新-uedbet官网下载
The machine is divided into two parts: the main machine and the hand-held counting handle
1.Before use, please put the bar counting device into the counting handle and tighten the protective cover. Bar counting device is divided400度和200degree of two kinds of endurance, theoretical life of not less10,000times, can be replaced.
2.The host can work under two conditions: external power supply and built-in lithium battery. AC use: On220V，Then turn on the two switches on the back of the main unit. DC status: Turn on the DC switch on the back of the main unit to start counting.
3.Set Number of Single Bundles: This operation sets the number of single bundles of reinforcement. When the set value is reached, the machine will sound a buzzer alarm and stop counting. Press the "Set" button of the host to set the "one bit" of the setting value ". After setting one bit, press this button to set the "ten" bit. In this way, you can set"100, ten thousand, ten thousand. The "plus" button increases "one" and the "minus" button decreases "one". If you do not use this function, please set the setting value to"0"(In this state, the setting indicator is yellow).
4.Multiple Count: Set this value to"N"After that, every time you click the end face of the steel bar, the system will automatically default to the rightNRoot bar count. After completing the above steps3After setting in (for ease of use, the design requires that the multiplier be set after 10,000 settings), press the "Set" button to select the one to useNvalue, such5，After completing the above settings, press the Set button to exit the setting state and enter the counting mode.
5.Counting correction: in counting mode, press the "plus" button or handle"B"by adding"1"to correct the count, while pressing the" minus "button or handle"A"can reduce the count by one.
6.Counting method: In the counting mode, click the end of the steel bar with the tip of the counting pen, and the indicator light on the handle head lights up, indicating that the counting is successful.
7.Clear count: When you need to clear the count value, press the clear key or handle of the hostC"key.
8.After using the bar counter: please turn off the two switches on the back of the host. If you need to charge, please turn on the power switch and then turn it offDCSwitch.
9.Battery management: After using the battery for the first two times, please charge it first8hours, then recharge at least4hour. If you find that the battery life is significantly shortened, please contact the manufacturer to replace the lithium battery.
keywords
Recommend News
Quick Links
Products
Contact Information
Telephone:+86-519-88400985
Telephone:+86-519-88405207
Mobile phone: +86-13813666262(WeChat)
E-mail:ceo@czds.cc
E-mail:cm_829@163.com
Address: 200 m north of the intersection of Innovation Road, Dongfang East Road, Changzhou Economic Development Zone, Jiangsu Province
Copyright©2024 Changzhou Dongsheng Detecting Instrument Co., Ltd.
Powered by: www.300.cn | Tags